![]() Free tables. |
![]() More free tables. |
![]() Even more of the free tables. |
![]() Bill Arden brought Table Runner kits. |
![]() A view of a prototype and an actual clear one. |
![]() A Table Runner going around and around. |
![]() Kenneth Kern is making this robot. |
![]() Front view. |
![]() You can see the frame is made of two plastic project boxes. It has a pan/tilt head on top. |
![]() You can see that it uses gell cell batteries and has a controller on top. |
![]() This is the Parallax controller board. |
![]() There is a Basic Stamp controller on the front. It looks like it might be used as a servo position controller. |
![]() This board is also on the front. Looks like transistor drivers. |
![]() There is a relay board in the middle somewhere. Probably to run the motors. |
![]() The pan/tilt head has some IR illumination and possibly an IR detector. There may be other sensors there that I can't see. |
![]() Someone is making this robot. |
![]() It has a controller on top. I think this was an Atmel processor. |
![]() The controller and the user interface. |
![]() It uses Solarbotics motors and wheels. There is also a ball caster in the back. |
![]() Top view. |
![]() It has photo detectors on the front for line following. The pots adjust the sensitivity of the detectors. |
![]() Close up of the line detector board. |
Back to Meeting Index | Home | <Prev | Next>