![]() Bill Arden had a whole box of boards with Mega16 controllers. |
![]() Jeff Sampson brought his red robot. |
![]() A close-up view. |
![]() Another view. |
![]() Ben Johnson (center) is going to MIT now. He stopped by on break. |
![]() 0807_14.jpg |
![]() Jean-marie Bertoncelli brought his robot. |
![]() It has lots of stuff on it now. |
![]() This looks like a Parallax Propeller board. |
![]() Another controller board inside. I think this one also drives the motors. |
![]() Side view. |
![]() Explaining. |
![]() Front view. |
![]() Iso view. |
![]() Pan/tilt unit. It looks like it has a CMUcam2. Three sonars. Two fixed Sharp I/R proxitiy sensors and one moveable. And a passive infrared sensor. |
![]() It uses R/C servos for pan and tilt. |
![]() Explaining. |
![]() More explaining. |
![]() Bruce Shapiro brought his 'Rope Spitter'. |
![]() Here it is not spitting rope. |
![]() Here it is again spitting like crazy. |
![]() And this is what happens when you whack it. |
![]() At the bottom end it piles up and kinda squirms around like a snake. |
![]() Bill Arden did a soldering/desoldering demo. |
![]() His setup. |
![]() Some parts he took off. |
![]() Bill's line follower. |
![]() Richard Piotter's BEAM spider robot. |
![]() 0807_01.jpg |